Errors

[dave]

Hi. One of our pipers is getting the following errors when opening a project. We just moved all of our projects onto a new server so I am relatively certain something is not pathed properly. I don't have any experience with the 3D side of the fence so hopefully one of you will know. Thanks!

http://www.davetyner.com/images/autoplant/3derror.jpg

[Colby]

Dave,

In the 3D project Directory i believe there is a folder called"CONFIG" in the folder there is a file called "config.ini" in this file (You can open it up in notepad) under the "[SYSTEM]" header is an entry called "Root_Specs_Dir" what is this pathed to? :?:

[Aplant Monkey]

Another place to look is in PA...

under System/Main

[dave]

Thanks guys. I changed the path after the migration. The problem is not with the project but seems to be something wrong with his laptop. I don't know why but no one else has the problems he does. I may have to wipe it out and re-install bentley.

[dave]

update: This from the Bentley guys fixed it right up...


Dave,

You need to go check the C:\Bentley Plant
Projects\SAMPLE_IMPERIAL\Config\CONFIG.INI and make sure that paths are
correct. The default Root_Specs_Dir = %NETWORK_ROOT%\specs\imperial.
This must be changed to match the new directory structure. And of course
the %NETWORK ROOT% is stored in the C:\Documents and Settings\All
Users\Application Data\Bentley\Plant 2004\CFG\AT.INI.

...the one place I didn't change the path.

Thanks Bentley guys!

[dave]

Dave,

In the 3D project Directory i believe there is a folder called"CONFIG" in the folder there is a file called "config.ini" in this file (You can open it up in notepad) under the "[SYSTEM]" header is an entry called "Root_Specs_Dir" what is this pathed to? :?:

aaannnd as I finally re-read this thread and see that Colby was all over it weeks before I got an answer from Bentley. Thanks Colby, I feel retarded.