Line width changes automatically

[aarti.vij]

Hi,

Line width and format of label changes suddenly while working on the P&ID,for few drawings...PL HELP!!!

[HybridAWD]

Hi,

Line width and format of label changes suddenly while working on the P&ID,for few drawings...PL HELP!!!

The line width will most likely be something referencing back to the PID_SUP.LSP file, I'd check into that.
As far as the label change, are you saying the title block?

[PlantWorker]

that kind of info comes from pid-sup.lsp. If you have a custom directory, it might have been renamed, or the network path is changed or not available ... In that case the program will use menu, lisp and symbols from the program folder.
Also check if all your drawings use the same custom directory. Some people forget to accept the prompt when creating a new drawing ..

[aarti.vij]

yes, m talking about the title block

The line width will most likely be something referencing back to the PID_SUP.LSP file, I'd check into that.
As far as the label change, are you saying the title block?

[dave]

Did the line widths just start changing? Is it happening on every machine? If you're certain that your custom directory is correct and it's not a pid-sup issue, you might want to check the layer that the title block is on and make sure it's not called out in the PID-sup.

As far as the title block information changing, it might have the same values of those in the doc_reg table and be updating it's information from there. Other than that, I wouldn't know why that would happen. (ruling out users of course)

[aarti.vij]

yes dave,the line width starts changing...ut not for all lines...for few lines on the drwg.It is happening on few computers.Can you tell me what to check in PID-sup.lsp file.


Did the line widths just start changing? Is it happening on every machine? If you're certain that your custom directory is correct and it's not a pid-sup issue, you might want to check the layer that the title block is on and make sure it's not called out in the PID-sup.

As far as the title block information changing, it might have the same values of those in the doc_reg table and be updating it's information from there. Other than that, I wouldn't know why that would happen. (ruling out users of course)

[dave]

you can start here:

http://www.davetyner.com/forum/tips-tricks-and-shortcuts/t-need-to-add-or-modify-line-weights-for-process-lines-96.html

I found this by clicking the search button and typing "pid-sup lisp"

:)

[aarti.vij]

Thankyou dave.
you can start here:

http://www.davetyner.com/forum/tips-tricks-and-shortcuts/t-need-to-add-or-modify-line-weights-for-process-lines-96.html

I found this by clicking the search button and typing "pid-sup lisp"

:)