Plant Salad
11-19-2008, 09:22 AM
I am having a Isogen issue generating ISOs. I ran an iso on two different machines on the same project on the same components and ended up with a couple issues:
1) pipe nipple on one is too large.
2) dimension on drain on one and not the other (don't want to dimension)
3) Valve Tag on non valve components.
We currently have Bentley looking into this, we have had isos put the tag on every component on our BOM and we are having problems with valve tags on control valves coming in with "$" instead of "-" ex: MOV$1200$A instead of MOV-1200-A and/or putting an "AT_xxxx" string next to the tag in the BOM.
1) pipe nipple on one is too large.
2) dimension on drain on one and not the other (don't want to dimension)
3) Valve Tag on non valve components.
We currently have Bentley looking into this, we have had isos put the tag on every component on our BOM and we are having problems with valve tags on control valves coming in with "$" instead of "-" ex: MOV$1200$A instead of MOV-1200-A and/or putting an "AT_xxxx" string next to the tag in the BOM.